Thac's RPMs for Mandrake9.1

Updated 2003-10-21

Added jackit-0.83.5

Added jackit-realtime-0.83.5

Added rosegarden-4-0.9.2.031021

Updated 2003-10-20

Added lilypond-2.1.0

Added noteedit-2.3.2

Updated 2003-10-12

Added ardour-beta5

Added cecilia-2.0.6 cvs031012

My Index rpms for Mandrake9.1

My Networking rpms for Mandrake9.1

My Monitoring rpms for Mandrake9.1

My Util rpms for Mandrake9.1

My Graphics rpms for Mandrake9.1

My Nachos rpms for Mandrake9.1

Because im getting a lot of questions about using the latest jackit
jackd -d alsa -d hw:0 -p 512
I have updated to latest jackit-0.83.5 which uses sysv-shm as default
NOTE: If you are using reiserfs or ext3fs or anything except ext2fs
for the directory where JACK puts its temporary files (/tmp by
default), actually it uses /tmp/jack
[edit /etc/fstab and add the following line]
none /tmp/jack ramfs defaults 0 0
Failure to do this will lead to extremely poor performance from JACK,
since its normal operation will cause bursts of disk I/O that are
completely unnecessary. This suggestion can also be used by ext2fs
users if they wish.

A MANDRAKE HOWTO The Complete Step-by-Step Guide to LINUX Mandrake 9.1
This is a must read to learn how to use Mandrake 9.1.

Type this in a console as root, to add my RPMS to the urpmi database.
urpmi.addmedia thacs.rpms http://www.mde.djura.org/9.1/RPMS with hdlist.cz

Check this page to add some more RPM resources to the urpmi database.
Easy urpmi config for Mandrake

The Mandrake Audio Workstation HowTo

Ardour brochure PDF

Jacking Pd and Ardour - a tootorial

Recording Audio from JACK-Enabled Applications in Ardour

The ardour documentation project.

Recording A MIDI Sequence With MusE

HOWTO Use MIDI Sequencers With Softsynths

JACK user documentation

ALSA Soundcard Matrix

Pd Documentation

Bownie's DIY Guide to Recording

Silvans Rosegarden tutorial

an Audacity Tutorial

Writing Audio Applications With JACK - A tutorial/journal

Multimedia kernel includes patches useful for multmedia purposes
like: preemption, low-latency and the ability for processes to transfer their capabilities.
The preemtion patches allow a task to be preempted anywhere within the kernel,
using spinlocks as markers for non-preemptibility regions.
The resulting system response is greatly increased, with measured average latencies under 1ms.
Andrew Morton's low-latency patches fix the remaining points in the kernel that cause latency.
The setpcap patch allows suid root processess to transfer capabilities to non-root processess,
and so making it possible for user processes to run with realtime priority.

kernel-multimedia-2.4.21.0.16mdk RPM here
kernel-multimedia-smp-2.4.21.0.16mdk-1-1mdk.i586.rpm RPM here
kernel-multimedia-source-2.4.21-0.16mdk.i586.rpm RPM here

Usb MIDI interfaces based on USB and the EZUSB chip.
These interfaces are very cheap and flexible, and supported
by the ALSA snd-usb-audio driver or the OSS kernel
driver usb-midi. Both drivers are included in Mandrake 9.1 now, but the
kernel driver is not enough, as these devices need also a firmware driver.
This is GPL firmware for some of these devices:
- Midiman Midisport 1x1
- Midiman Midisport 2x2
- Midiman Midisport UNO
- Steinberg USB-2-MIDI

ezusbmidi-2002_10_20 RPM here
ezusbmidi-2002_10_20 SRPM here
fxload-2002_04_11 RPM here
fxload-2002_04_11 SRPM here
My sdcc-2.3.0 RPM here
My sdcc-2.3.0 SRPM here

Swh-plugins is a website for GPL'd (free software) audio plugins.
At the moment the only ones here are for LADSPA, the Linux Audio Developers Plugin API.
This one is built with sse optimization enabled.
Added the latest version of swh plugins-0.4.2 which requires fftw-3.0

My swh-plugins-0.4.2 RPM here
My swh-plugins-0.4.2 SRPM here
My libfftw3-3.0 RPM here
My libfftw3-devel-3.0 RPM here
My libfftw3-threads-3.0 RPM here
My libfftw3-threads-devel-3.0 RPM here
My fftw-3.0 SRPM here
My swh-plugins-0.4.0 RPM here
My swh-plugins-0.4.0 SRPM here
My libfftw2-2.1.5 RPM here
My libfftw2-devel-2.1.5 RPM here
My libfftw2-mpi-2.1.5 RPM here
My libfftw2-mpi-devel-2.1.5 RPM here
My libfftw2-threads-2.1.5 RPM here
My libfftw2-threads-devel-2.1.5 RPM here
My fftw-2.1.5 SRPM here

cmt-The Computer Music Toolkit is a collection of LADSPA plugins for use with
software synthesis and recording packages on Linux.

cmt-1.15 RPM here
cmt-1.15 SRPM here

Nyquist is a language for sound synthesis and music composition.
Unlike score languages that tend to deal only with
events, or signal processing languages that tend to deal only with
signals and synthesis, Nyquist handles both in a single integrated
system. Nyquist is also flexible and easy to use because it is based
on an interactive Lisp interpreter.

nyquist-2.29 RPM here
nyquist-2.29 SRPM here

Qjackctl is a simple Qt application to control the JACK sound server daemon,
specific for the Linux Audio Desktop infrastructure.

qjackctl-0.0.9a RPM here
qjackctl-0.0.9a SRPM here

Jack-Rack is an effects "rack" for the JACK low latency audio API.
The rack can be filled with LADSPA effects plugins. It's phat; it turns your computer into an effects box.
LADCCA is a session management system for JACK and ALSA audio applications on GNU/Linux.
Qjackconnect is a QT based patchbay for the JACK Audio Connection Kit (jackit).
liblrdf is a library to make it easy to manipulate RDF files describing LADSPA plugins.Built on Raptor.
Raptor contains the Redland RDF Parser that reads RDF encoded in XML.

My jack-rack-1.4.2 RPM here
My jack-rack-1.4.2 SRPM here
My qjackconnect-0.0.3b RPM here
My qjackconnect-0.0.3b SRPM here
My jackit-0.83.5 RPM here
My jackit-example-clients-0.83.5 RPM here
My libjack0-0.83.5 RPM here
My libjack0-devel-0.83.5 RPM here
My jackit-0.83.5 SRPM here
My jackit-realtime-0.83.5 RPM here
My jackit-realtime-0.83.5 SRPM here
My liblrdf0-0.3.2 RPM here
My liblrdf0-common-0.3.2 RPM here
My liblrdf0-devel-0.3.2 RPM here
My liblrdf0-0.3.2 SRPM here
My raptor-1.0.0 RPM here
My libraptor0-1.0.0 RPM here
My libraptor0-devel-1.0.0 RPM here
My raptor-1.0.0 SRPM here
My ladcca-0.3.1 RPM here
My libladcca1-0.3.1 RPM here
My libladcca1-devel-0.3.1 RPM here

Csound is a software synthesis program. But more than that, Csound doesn't
suffer the same kinds of limitations that other software & hardware
synthesizers have. There are no limits to the amount of oscillators or filters
one can use. Csound is also completely modular, so that any function
in Csound can be used in an array of ways.
This is built from Istvan Varga's optimized Csound.

My Csound-4.24.0 RPM here
My Csound-devel-4.24.0 RPM here
My Csound-4.24.0 SRPM here

Cecilia is a graphic user interface for the sound synthesis and sound processing package CSound.
Cecilia enables the user to build very quickly graphic interfaces with
sliders and curves to control CSound intruments.
It is also an editor to CSound with syntax highlighting and
a built-in reference. Cecilia is also a great tool to explore
the parameters of a new opcode in an interactive and intuitive way.
New version with alot of Mandrake fixes.
Added cecilia-2.0.6 cvs031012
It works perfectly with newer versions of csound like csound 4.24.0

My cecilia-2.0.6 cvs031012 RPM here
My cecilia-2.0.6 cvs031012 SRPM here
My tcllib-8.4.2 RPM here
My itcl-8.4.2 RPM here
My tix-8.4.2 RPM here
My tclx-8.4.2 RPM here
My expect-8.4.2 RPM here
My tk-8.4.2 RPM here
My tcl-8.4.2 RPM here
My tcltk-8.4.2 SRPM here
My cecilia-2.0.5 RPM here
My cecilia-2.0.5 SRPM here

Fluidsynth is a real-time software synthesizer based on the Soundfont2 specifications.
It is a "software sampler".
Note: FluidSynth was previously called IIWU Synth.

My fluidsynth-1.0.3 RPM here
My libfluidsynth1-1.0.3 RPM here
My libfluidsynth1-devel-1.0.3 RPM here
My fluidsynth-1.0.3 SRPM here
My jackit-0.83.5 RPM here
My jackit-example-clients-0.83.5 RPM here
My libjack0-0.83.5 RPM here
My libjack0-devel-0.83.5 RPM here
My jackit-0.83.5 SRPM here
My jackit-realtime-0.83.5 RPM here
My jackit-realtime-0.83.5 SRPM here

Swami Sample Waveforms and Audio for Magical Instruments - is an instrument patch editor
with plans to be much more. It currently allows editing of SoundFont files and
uses iiwusynth for software synthesis, so pretty much any sound card can be used.
iiwusynth gives us real time effect control and SoundFont 2.01 modulator support for
controlling effects in real time with MIDI controls.

My swami-0.9.1a RPM here
My libswami0-0.9.1a RPM here
My libswami0-devel-0.9.1a RPM here
My swami-0.9.1a SRPM here
My fluidsynth-1.0.3 RPM here
My libfluidsynth1-1.0.3 RPM here
My libfluidsynth1-devel-1.0.3 RPM here
My fluidsynth-1.0.3 SRPM here

Muse is a MIDI/Audio sequencer with recording and editing capabilities.
Some Highlights:
* standard midifile (smf) import-/export
* organizes songs in tracks and parts which you can arrange with the part editor
* midi editors: pianoroll, drum, list, controller
* score editor with high quality postscript printer output
* realtime: editing while playing
* unlimited number of open editors
* unlimited undo/redo
* realtime and step-recording
* multiple midi devices
* unlimited number of tracks
* audio playback/recording
This is not the same version as in cooker contrib, this version
is compiled with fluidsynth, jackit-0.83.5 and graphviz support.
Added patch for jackit-0.83.5 and softsynth dedlock fix.

My muse-0.6.1 RPM here
My muse-0.6.1 SRPM here
My fluidsynth-1.0.3 RPM here
My libfluidsynth1-1.0.3 RPM here
My libfluidsynth1-devel-1.0.3 RPM here
My jackit-0.83.5 RPM here
My jackit-example-clients-0.83.5 RPM here
My libjack0-0.83.5 RPM here
My libjack0-devel-0.83.5 RPM here
My jackit-0.83.5 SRPM here
My jackit-realtime-0.83.5 RPM here
My jackit-realtime-0.83.5 SRPM here
ladcca-0.3.1 RPM here
libladcca1-0.3.1 RPM here
libladcca1-devel-0.3.1 RPM here
graphviz-1.9.0 RPM here
libgraphviz7-1.9.0 RPM here
libgraphviz7-devel-1.9.0 RPM here
libgraphviztcl7-1.9.0 RPM here
libgraphviztcl7-devel-1.9.0 RPM here
libcap1-1.10 RPM here
libcap-utils-1.10 RPM here
libcap1-devel-1.10 RPM here

VSTServer is a wine program that must be running when using programs
using vstlib.
Vstlib libvst is a library that can be used by programs to run windows
vst audio plugins under linux/freebsd/i386solaris/etc.
vst ladspa plugin libladspavst makes vst plugins located in $VST_PATH appear as ladspa plugins.
k_vst~, a Pd tilde object for hosting VST plug-ins.This replaces the old plugin~
Pd is a free real-time computer music software package resembling Max.
I have made my own pd-jack patch for 0.36 from cvs.
Wine latest version built from vstserver-0.2.7-wine-13.09.2003 which is wine-20030913.
Added patches to be built to replace rpm for Mandrake9.1

SnapshotThis is a picture of PD in Linux running two GRM tools
plugins using the vst k_vst~ object, and the NorthPole
plugin using the ladspa plugin~ object, in realtime. And
much smoother than it would do in windows (of course).

My vstserver-0.2.7 RPM here
My libvst-0.2.7 RPM here
My libvst-devel-0.2.7 RPM here
My vstserver-0.2.7 SRPM here
My libladspavst-0.1.4 RPM here
My libladspavst-0.1.4 SRPM here
My k_vst~-0.2.6 RPM here
My k_vst~-devel-0.2.6 RPM here
My plugin~-0.2 RPM here
My k_vst~-0.2.6 SRPM here
My pd-alsa-jack-extended-0.36 RPM here
My pd-alsa-jack-extended-devel-0.36 RPM here
My pd-alsa-jack-extended-0.36 SRPM here
My wine-20030913 RPM here
My wine-utils-20030913 RPM here
My libwine1-20030913 RPM here
My libwine1-devel-20030913 RPM here
My wine-20030913 SRPM here
My jackit-0.83.5 RPM here
My jackit-example-clients-0.83.5 RPM here
My libjack0-0.83.5 RPM here
My libjack0-devel-0.83.5 RPM here
My jackit-0.83.5 SRPM here
My jackit-realtime-0.83.5 RPM here
My jackit-realtime-0.83.5 SRPM here
My tcllib-8.4.2 RPM here
My itcl-8.4.2 RPM here
My tix-8.4.2 RPM here
My tclx-8.4.2 RPM here
My expect-8.4.2 RPM here
My tk-8.4.2 RPM here
My tcl-8.4.2 RPM here
My tcltk-8.4.2 SRPM here

Ceres a greatly updated new version (0.37) from Kjetil S. Matheussen.
Ceres3 is a cut-and-paste spectral editor with musically enhanced
graphic control over spectral activity of a sound file. It is a free
educational program with no other aims, and it owes most of its
framework to Oyvind Hammer's Ceres and Jonathan Lee's Ceres2. It has
an X-window Motif/Lesstif based GUI, organized around four principal
menus with simple keyboard shortcuts.

My ceres-0.40 RPM here
My libceres-0.40 RPM here
My ceres-0.40 SRPM here
python-2.3 RPM here
libpython2.3-2.3 RPM here
libpython2.3-devel-2.3 RPM here
python-docs-2.3 RPM here
python-base-2.3 RPM here
tkinter-2.3 RPM here
python-2.3 SRPM here
termcap-11.0.1 RPM here
termcap-11.0.1 SRPM here

Mammut will FFT your sound in one single gigantic analysis (no windows).
These spectral data, where the development in time is incorporated in
mysterious ways, may then be transformed by different algorithms prior
to resynthesis. An interesting aspect of Mammut is its completely non-intuitive
sound transformation approach.

My mammut-0.15 RPM here
My libmammut-0.15 RPM here
My mammut-0.15 SRPM here
python-2.3 RPM here
libpython2.3-2.3 RPM here
libpython2.3-devel-2.3 RPM here
python-docs-2.3 RPM here
python-base-2.3 RPM here
tkinter-2.3 RPM here
python-2.3 SRPM here
termcap-11.0.1 RPM here
termcap-11.0.1 SRPM here

Ardour Ardour is a multichannel hard disk recorder (HDR) and digital audio workstation (DAW).
It is capable of simultaneous recording 24 or more channels of 32 bit audio at 48kHz.
Ardour is intended to function as a "professional" HDR system, replacing dedicated hardware solutions such as the Mackie HDR,
the Tascam 2424 and more traditional tape systems like the Alesis ADAT series.
It is also intended to provide the same or better functionality as proprietary software DAWs such as ProTools, Samplitude, Logic Audio,
Nuendo and Cubase VST (we acknowledge these and all other names as trademarks of their respective owners).
It supports MIDI Machine Control, and so can be controlled from any MMC controller, such as the Mackie Digital 8 Bus mixer and many other modern digital mixers.
The new files written by ardour will be unusable with just about any other linux software,
they will work with "pro" audio apps that support BWF(BROADBAND WAVE FORMAT) (eg. logic, protools etc.)-bwf version
To use ardour with other Linux apps use the native format (WAVE FORMAT support).
You choose which format to use from the settings dialog
Added ardour-0.9beta5 RPMS.

My ardour-0.9beta5 RPM here
My libardour-0.9beta5 RPM here
My libardour-devel-0.9beta5 RPM here
My ksiardour-0.9beta5 RPM here
My ardour-pixmaps-0.9beta5 RPM here
My ardour-0.9beta5 SRPM here
My jackit-0.83.5 RPM here
My jackit-example-clients-0.83.5 RPM here
My libjack0-0.83.5 RPM here
My libjack0-devel-0.83.5 RPM here
My jackit-0.83.5 SRPM here
My jackit-realtime-0.83.5 RPM here
My jackit-realtime-0.83.5 SRPM here
My liblrdf0-0.3.2 RPM here
My liblrdf0-common-0.3.2 RPM here
My liblrdf0-devel-0.3.2 RPM here
My liblrdf0-0.3.2 SRPM here
My raptor-1.0.0 RPM here
My libraptor0-1.0.0 RPM here
My libraptor0-devel-1.0.0 RPM here
My raptor-1.0.0 SRPM here
My libsndfile1-1.0.5 RPM here
My libsndfile1-devel-1.0.5 RPM here
My libsndfile1-static-devel-1.0.5 RPM here
My libsndfile-progs-1.0.5 RPM here
My libsndfile-1.0.5 SRPM here
libsamplerate0-0.0.15 RPM here
libsamplerate-progs-0.0.15 RPM here
libsamplerate0-devel-0.0.15 RPM here
libsamplerate-0.0.15 SRPM here

Vkeyb s a virtual keyboard for AWE, MIDI and ALSA drivers.
It's a simple fake of a MIDI keyboard on X-windows system.
Enjoy a music with your mouse and "computer" keyboard.

My vkeybd-0.1.14 RPM here
My vkeybd-0.1.14 SRPM here

Kalsatools currently implements five applications:
kaconnect,kwaveview,qamix annd qarecord the fifth has it own homepage.
AlsaModularSynth is a realtime modular synthesizer and effect processor. It features

* MIDI controlled modular software synthesis
* Realtime effect processing with capture from e.g. "Line In" or "Mic In".
* Full control of all synthesis and effect parameters via MIDI.

It is possible to use (almost) any LADSPA plugin with AlsaModularSynth.
Many commented examples and demo patches show how to use AlsaModularSynth.

KWaveView is a realtime scope and spectrum analyzer.

Kaconnect is a QT version of the aconnect utility for the ALSA sequencer system.

My ams-1.5.12 RPM here
My ams-1.5.12 SRPM here
cmt-1.15 RPM here
My kaconnect-1.1.1 RPM here
My kaconnect-1.1.1 SRPM here
My kwaveview-1.1.4 RPM here
My kwaveview-1.1.4 SRPM here
My qamix-0.0.6 RPM here
My qamix-0.0.6 SRPM here
My qarecord-0.0.9 RPM here
My qarecord-0.0.9 SRPM here
My jackit-0.83.5 RPM here
My jackit-example-clients-0.83.5 RPM here
My libjack0-0.83.5 RPM here
My libjack0-devel-0.83.5 RPM here
My jackit-0.83.5 SRPM here
My jackit-realtime-0.83.5 RPM here
My jackit-realtime-0.83.5 SRPM here
My libfftw2-2.1.5 RPM here
My libfftw2-devel-2.1.5 RPM here
My libfftw2-mpi-2.1.5 RPM here
My libfftw2-mpi-devel-2.1.5 RPM here
My libfftw2-threads-2.1.5 RPM here
My libfftw2-threads-devel-2.1.5 RPM here
My fftw-2.1.5 SRPM here
python-CDDB-1.3 RPM here
python-ID3-1.2 RPM here
pyvorbis-1.0 RPM here

Rosegarden is an attractive, user-friendly MIDI and audio sequencer, notation editor,
and general-purpose music composition and editing application for Unix and Linux.
This is my Rosegarden RPMS one for arts and one for alsa and the needed tools which is not included in Mandrake9.1.
Built with ladspa support for both arts and alsa version and also jack support for alsa version.
Added of rosegarden-4-0.9.1 a bugfix release,now it build without patching again.
Added of rosegarden-4-0.9.2 from cvs031021

My Rosegarden-4-arts-0.9.1 RPM here
My librosegarden0-4-arts-0.9.1 RPM here
My librosegarden0-4-arts-devel-0.9.1 RPM here
My Rosegarden-4-alsa-0.9.1 RPM here
My librosegarden0-4-alsa-0.9.1 RPM here
My librosegarden0-4-alsa-devel-0.9.1 RPM here
My Rosegarden-4-0.9.1 SRPM here
My Rosegarden-4-alsa-0.9.2.031021 RPM here
My librosegarden0-4-alsa-0.9.2.031021 RPM here
My librosegarden0-4-alsa-devel-0.9.2.031921 RPM here
My Rosegarden-4-0.9.2.031021 SRPM here
My jackit-0.83.5 RPM here
My jackit-example-clients-0.83.5 RPM here
My libjack0-0.83.5 RPM here
My libjack0-devel-0.83.5 RPM here
My jackit-0.83.5 SRPM here
My jackit-realtime-0.83.5 RPM here
My jackit-realtime-0.83.5 SRPM here
My libfftw2-2.1.5 RPM here
My libfftw2-devel-2.1.5 RPM here
My libfftw2-mpi-2.1.5 RPM here
My libfftw2-mpi-devel-2.1.5 RPM here
My libfftw2-threads-2.1.5 RPM here
My libfftw2-threads-devel-2.1.5 RPM here
My fftw-2.1.5 SRPM here
python-CDDB-1.3 RPM here
python-ID3-1.2 RPM here
pyvorbis-1.0 RPM here

Noteedit is a score editor based on the Midi library TSE3. It can read and
write Midi files and process events sent from an external Midi keyboard.
The configured Midi devices of the system can be used to playback the score.
The score can be saved as MusiXTeX file for printout.

My noteedit-2.3.2 RPM here
My libnoteedit1-2.3.2 RPM here
My libnoteedit1-devel-2.3.2 RPM here
My noteedit-2.3.2 SRPM here
tse3-0.2.7 RPM here
libtse3_0-0.2.7 RPM here
libtse3_0-devel-0.2.7 RPM here

Lilypond prints beautiful sheet music.
It produces music notation from a description file.
It excels at typesetting classical music, but you can also print pop-songs.
Big thanx to Heikki Junes for making it possible to build this one in Mandrake 9.1
Updated flex-2.5.4a with all the latest patches and to the latest versions of pfaedit and mftrace
I have rebuilt guile-1.6.4 from cooker

lilypond-2.1.0 RPM here
liblilypond-2.1.0 RPM here
lilypond-documentation-2.1.0 RPM here
lilypond-2.1.0 SRPM here
lilypond-2.0.1 RPM here
liblilypond-2.0.1 RPM here
lilypond-documentation-2.0.1 RPM here
lilypond-2.0.1 SRPM here
lilypond-1.8.2 RPM here
liblilypond-1.8.2 RPM here
lilypond-documentation-1.8.2 RPM here
lilypond-1.8.2 SRPM here
guile-1.6.4 RPM here
libguile12-1.6.4 RPM here
libguile12-devel-1.6.4 RPM here
guile-1.6.4 SRPM here
My flex-2.5.4a RPM here
My flex-2.5.4a SRPM here
My mftrace-1.0.19 RPM here
My mftrace-1.0.19 SRPM here
My pfaedit-030904 RPM here
My pfaedit-030904 SRPM here
pstoedit-3.33 RPM here
libpstoedit0-3.33 RPM here
libpstoedit0-devel-3.33 RPM here
autotrace-0.31.1 RPM here
libautotrace3-0.31.1 RPM here
libautotrace3-devel-0.31.1 RPM here
python-2.3 RPM here
libpython2.3-2.3 RPM here
libpython2.3-devel-2.3 RPM here
python-docs-2.3 RPM here
python-base-2.3 RPM here
tkinter-2.3 RPM here
python-2.3 SRPM here
termcap-11.0.1 RPM here
termcap-11.0.1 SRPM here

Denemo is the GNU graphical musical score editor, and serves as a frontend to Lilypond.

My denemo-0.7.1 RPM here
My denemo-devel-0.7.1 RPM here
My denemo-0.7.1 SRPM here

ExEf (Extreme Effect) is an extremely powerful and flexible Real Time effect engine
running on a PC under LINUX.
It is designed to work with guitars, microphones and other instruments.
It can run both in X Window System and command line.

ExEf-1.16 RPM here
ExEf-1.16 SRPM here

Ele-2.01A rewrite of ELE (Excellent Low-latency Effects)

ele-2.01 RPM here
ele-2.01 SRPM here
libsvgalib1-1.4.3 RPM here
libsvgalib1-devel-1.4.3 RPM here
svgalib1-1.4.3 SRPM here

StompBoxes is a real-time audio effects processor designed for guitar under Linux.
It is written in C using gtk+ for the graphical user interface.
The sound is processed in 16 bit at a rate of 44100Hz.

stompboxes2-0.3 RPM here
stompboxes2-0.3 SRPM here

Ecasound is a software package designed for multitrack audio processing.
It can be used for simple tasks like audio playback, recording and format conversions,
as well as for multitrack effect processing, mixing, recording and signal recycling.
Ecasound supports a wide range of audio inputs, outputs and effect algorithms.
Effects and audio objects can be combined in various ways, and their parameters can be controlled
by operator objects like oscillators and MIDI-CCs.

ecasound-2.3.0 RPM here
libecasound-devel-2.3.0 RPM here
pyecasound-2.3.0 RPM here
ecasound-2.3.0 SRPM here

Ecamegapedal is a real-time effect processor software with a graphical user interface
for controlling the effect parameters.
It is meant to be used as a virtual guitar-fx or studio effect box.
In addition to real-time operation, ecamegapedal also supports reading from and writing to audio files.
All audio object and effect plugin types provided by the ecasound libraries are supported.
This includes ALSA, JACK, OSS, aRts, over 20 file formats, over 30 effect types,
LADSPA plugins and multi-operator effect presets.
Ecamegapedal's implementation is based on ecasound and Qt libraries.

ecamegapedal-0.4.3 RPM here
ecamegapedal-0.4.3 SRPM here

Ecawaveis a simple graphical audio file editor.
The user-interface is based on Qt libraries, while almost all audio functionality is
taken directly from ecasound libraries.
As Ecawave is designed for editing large audio files, all processing is done direct-to-disk.
Simple waveform caching is used to speed up file operations.
Ecawave supports all audio file formats and effect algorithms provided by ecasound libraries.
This includes OSS, ALSA, aRts, over 20 file formats, over 30 effect types, LADSPA plugins,
and multi-operator effect presets.

ecawave-0.6.1 RPM here
ecawave-0.6.1 SRPM here

Audacity is a free audio editor. You can record sounds, play sounds,
import and export WAV, AIFF, and MP3 files, and more.
Use it to edit your sounds using Cut, Copy and Paste (with unlimited Undo),
mix tracks together, or apply effects to your recordings.
It also has a built-in amplitude envelope editor, a customizable
spectrogram mode and a frequency analysis window for audio analysis
applications. Built-in effects include Bass Boost, Wahwah,
and Noise Removal, and it also supports VST plug-in effects.
Added 2 versions of the latest audacity-1.2.0-pre2 one built for oss
and one built for alsa jackit.

My audacity-1.2.0-pre2 RPM for oss here
My audacity-1.2.0-pre2 SRPM for oss here
My audacity-1.2.0-pre2 RPM for alsa jackit here
My audacity-1.2.0-pre2 SRPM for alsa jackit here
wxGTK2.5-2.5.0 RPM here
libwxgtk2.5-devel-2.5.0 RPM here
libwxgtk2.5-devel-2.5.0 RPM here
libwxgtkgl2.5-2.5.0 RPM here
libwxgtk2.5-devel-2.5.0 SRPM here
libid3tag0-0.15.0b RPM here
libid3tag0-devel-0.15.0b RPM here
libid3tag-0.15.0b SRPM here
libmad0-0.15.0b RPM here
libmad0-devel-0.15.0b RPM here
mad-0.15.0b SRPM here
libsamplerate0-0.0.15 RPM here
libsamplerate0-devel-0.0.15 RPM here
libsamplerate-progs-0.0.15 RPM here
libsamplerate-0.0.15 SRPM here

Kguitar is basically a guitar tabulature editor for K Desktop
Environment. It's much more than just a tab editor. It's features are:
* free GPLed K Desktop Environment GUI
* Powerful and convenient tabulature editing, including many effects
and classical note score editing for classic instrument players
* Full and very customizable MIDI to tabulature import and export
* Support of extra data formats, such as ASCII tabulatures or popular
programs' format, such as Guitar Pro's or TablEdit
* Chord fingering construction tools - chord finder & chord analyzer
* Highly customizable to suit a lot of possible instruments (not only
6-stringed guitars, and even not only guitars), including drum tracks,
lyrics and other MIDI events.
Well, right now KGuitar is in very alpha state and doesn't support
everything stated. However, it already features a nice tabulature
editor, though not ultimately powerful, loading/saving its own format (kg
files) and all the chord construction tools.

kguitar-0.4.9 RPM here
kguitar-0.4.9 SRPM here
tse3-0.2.7 RPM here
libtse3_0-0.2.7 RPM here
libtse3_0-devel-0.2.7 RPM here

amSynth is a software synthesizer, taking inspiration from the original synths and
latest digital ones, while keeping an intuitive interface.
NOTE: You should run it from the command line the first time.

amSynth-1.0rc4 RPM here
amSynth-1.0rc4 SRPM here

Brahms provides an environment to operate on music data.
At first, a piece of music is coded as a collection of midi events
kept in parts and tracks the structures of a Brahms song.
Especially note objects keep extended information for intonation and
abstract properties (like enharmonic shift), which the midi format lacks.
These notes can of course be played with Brahms via the midi interface.

brahms-1.02 RPM here
brahms-1.02 SRPM here

dap is a comprehensive audio sample editing and processing suite.
It currently supports AIFF and AIFF-C audio files, 8 or 16 bit resolution, and 1, 2 or 4 channels of audio data.
The package offers comprehensive editing, playback, and recording facilities including full time stretch resampling,
manual data editing, and a reasonably complete DSP processing suite.

dap-2.1.4 RPM here
dap-2.1.4 SRPM here

freqtweak is a tool for FFT-based realtime audio spectral manipulation and display.
It provides several algorithms for processing audio data in the frequency domain
and a highly interactive GUI to manipulate the associated filters for each.
It also provides high-resolution spectral displays in the form of scrolling-raster
spectragrams and energy vs frequency plots displaying both pre- and post-processed spectra.

My freqtweak-0.5.3 RPM here
My freqtweak-0.5.3 SRPM here
My libfftw3-3.0 RPM here
My libfftw3-devel-3.0 RPM here
My libfftw3-threads-3.0 RPM here
My libfftw3-threads-devel-3.0 RPM here
My fftw-3.0 SRPM here
My jackit-0.83.5 RPM here
My jackit-example-clients-0.83.5 RPM here
My libjack0-0.83.5 RPM here
My libjack0-devel-0.83.5 RPM here
My jackit-0.83.5 SRPM here
My jackit-realtime-0.83.5 RPM here
My jackit-realtime-0.83.5 SRPM here

galan is much like setting up an effects-chain for, say, a guitar.
You choose the effects units you wish to use, lay them out, and then connect them
to each other, starting with the guitar, threading through the effects, and ending up
at the amplifier (and ultimately the speakers).
It's not just limited to acting as an effects-chain, though. You can also configure it
(using the same basic principles) to act as a mixer, a sample-sequencer or drum machine,
or a synthesiser capable of emulating various analogue systems.
The examples page and the tutorial provide some descriptions of some of the ways gAlan
can be used. The User Guide has a section on common motifs in mesh design which may also
give an impression of how gAlan works.
galan-0.3.0_alpha1 is This release contains gtk+-2.0 support and jack support.
Built against fftw-2.1.5 that is built with --enable-mpi

My galan-0.2.14 RPM here
My libgalan0-0.2.14 RPM here
My libgalan0-0.2.14 RPM here
My galan-0.2.14 SRPM here
My galan-0.3.0_alpha1 RPM here
My libgalan0-0.3.0_alpha1 RPM here
My libgalan0-devel_alpha1 RPM here
My galan-0.3.0_alpha1 SRPM here
My libfftw2-2.1.5 RPM here
My libfftw2-devel-2.1.5 RPM here
My libfftw2-mpi-2.1.5 RPM here
My libfftw2-mpi-devel-2.1.5 RPM here
My libfftw2-threads-2.1.5 RPM here
My libfftw2-threads-devel-2.1.5 RPM here
My fftw-2.1.5 SRPM here
My jackit-0.83.5 RPM here
My jackit-example-clients-0.83.5 RPM here
My libjack0-0.83.5 RPM here
My libjack0-devel-0.83.5 RPM here
My jackit-0.83.5 SRPM here
My jackit-realtime-0.83.5 RPM here
My jackit-realtime-0.83.5 SRPM here

glame is meant to be the GIMP of audio processing.
It is designed to be a powerful, fast, stable, and easily extensible sound editor for Linux and compatible systems.
Supported platforms are Linux and IRIX.

glame-1.0.1 RPM here
glame-1.0.1 SRPM here

freebirth is a free software bass synthesizer/step sequencer/sample player for the Linux operating system.
It consists of a bass synthesizer, vaguely 303ish, with three oscillators (saw, sin, sqr), phase offsets for each oscillator,
separate filter and amplitude envelopes, separate tuning for each oscillator, and two effects busses (reverb and delay).

freebirth-0.3.2 RPM here
freebirth-0.3.2 SRPM here

smurf is a GTK based sound font editor.
Sound font files are a collection of audio samples and other data that describe instruments
for the purpose of composing music. Sound fonts do not describe the music itself, but rather
the sounds of the instruments. These instruments can be composed of any digitally recordable
or generated sound. This format provides a portable and flexible sound synthesis environment
that can be supported in hardware or software.

My smurf-0.52.6 RPM here
My smurf-0.52.6 SRPM here

snd is a freeware sound editor modelled loosely after Emacs and an old,
sorely-missed PDP-10 sound editor named Dpysnd.

snd-6.6 RPM here
snd-6.6 SRPM here

sweep is an audio editor and live playback tool for GNU/Linux, BSD and compatible systems.
It supports many music and voice formats including WAV, AIFF, Ogg Vorbis, Speex and MP3, with multichannel
editing and LADSPA effects plugins. Inside lives a pesky little virtual stylus called Scrubby who enjoys
mixing around in your files.
libspeex is a patent-free audio codec designed especially for voice (unlike Vorbis which targets general audio)
signals and providing good narrowband and wideband quality.
This project aims to be complementary to the Vorbis codec.

sweep-0.8.2 RPM here
sweep-devel-0.8.2 RPM here
sweep-0.8.2 SRPM here
libspeex1-1.0 RPM here
libspeex1-devel-1.0-0 RPM here
libspeex1-static-devel-1.0-0 RPM here
libtdb1-1.0.6 RPM here
libtdb1-devel-1.0.6 RPM here

ZynAddSubFX is a real-time software synthesizer for Linux with many features, including polyphony,
multi-timbral and microtonal capabilities.
It includes randomness of some parameters,which makes warm sounds, like analogue synthesizers.
The program has system/insertion effects, too.
Fixed ZynAddSubFX to link against single precision fftw instead of Mandrakes default duble precision fftw which caused ZynAddSubFX to crash

ZynAddSubFX-1.4.3 RPM here
ZynAddSubFX-1.4.3 SRPM here
My libfftw2-2.1.5 RPM here
My libfftw2-devel-2.1.5 RPM here
My libfftw2-mpi-2.1.5 RPM here
My libfftw2-mpi-devel-2.1.5 RPM here
My libfftw2-threads-2.1.5 RPM here
My libfftw2-threads-devel-2.1.5 RPM here
My fftw-2.1.5 SRPM here
My jackit-0.83.5 RPM here
My jackit-example-clients-0.83.5 RPM here
My libjack0-0.83.5 RPM here
My libjack0-devel-0.83.5 RPM here
My jackit-0.83.5 SRPM here
My jackit-realtime-0.83.5 RPM here
My jackit-realtime-0.83.5 SRPM here

SpiralSynthModular(SSM) is a object oriented modular softsynth/sequenser/sampler.
Audio or control data can be freely passed between the plugins, its
all treated the same. DAta can also be fed back on itself for chaotic
effects

spiralsynthmodular-0.2.1 RPM here
spiralsynthmodular-0.2.1 SRPM here

SpiralLoops provides a simple, visual tool for looping and layering of sounds;
which can be sourced from either wav files on disk, or from sound generating plugins.

SpiralLoops-2.0.0 RPM here
SpiralLoops-2.0.0 SRPM here

SpiralSynth is a simple polyphonic analogue modelling softsynth that tries
to be as easy to use as possible.

SpiralSynth-2.0.0 RPM here
SpiralSynth-2.0.0 SRPM here

MuSE (Multiple Streaming Engine) is an application for the mixing, encoding, and network streaming of sound:
it can simultaniously mix up to 6 encoded audio bitstreams (from files or network)
plus a souncard input signal, the resulting stream can be played locally on the
sound card and/or encoded as an compressed (mp3 or ogg) sent to an icecast server.
MuSE offers graphical interfaces to be operated realtime, but is also a practical
and complete commandline tool for streaming.
Added MuSE 0.8.1cvs from 030917 on request from Samuel Vanneste

My MuSE-0.8.1cvs RPM here
My MuSE-0.8.1cvs SRPM here
My MuSE-0.8.1 RPM here
My MuSE-0.8.1 SRPM here
libmp3lame0-3.93.1 RPM here
libmp3lame0-devel-3.93.1 RPM here
libmp3lame0-static-devel-3.93.1 RPM here

Tapiir is a simple and flexible audio effects processor, inspired on
the classical magnetic tape delay systems used since the early days of
electro-acoustic music composition. It provides a graphical user
interface consisting of six delay lines, or "taps", which can
introduce an almost arbitrarily big or small delay to their inputs and
can be feed back to each other.
A wide set of effects can be easily achieved by properly configuring
and connecting the delay lines: complex echo patterns, resonances,
filtering, etc. Delays, interconnections and gains can all be
controlled in real time.

My tapiir-0.7.1 RPM here
My tapiir-0.7.1 SRPM here
My jackit-0.83.5 RPM here
My jackit-example-clients-0.83.5 RPM here
My libjack0-0.83.5 RPM here
My libjack0-devel-0.83.5 RPM here
My jackit-0.83.5 SRPM here
My jackit-realtime-0.83.5 RPM here
My jackit-realtime-0.83.5 SRPM here

TerminatorX is a realtime audio synthesizer that allows you to "scratch" on digitally sampled audio data
(*.wav, *.au, *.ogg, *.mp3, etc.) the way hiphop-DJs scratch on vinyl records.
It features multiple turntables, realtime effects (buit-in as well as LADSPA plugin effects), a sequencer and an easy-to-use gtk+ GUI.

My terminatorX-3.81 RPM here
My terminatorX-3.81 SRPM here
My liblrdf0-0.3.2 RPM here
My liblrdf0-common-0.3.2 RPM here
My liblrdf0-devel-0.3.2 RPM here
My liblrdf0-0.3.2 SRPM here
My raptor-1.0.0 RPM here
My libraptor0-1.0.0 RPM here
My libraptor0-devel-1.0.0 RPM here
My raptor-1.0.0 SRPM here
libsvgalib1-1.4.3 RPM here
libsvgalib1-devel-1.4.3 RPM here
libsvgalib1-1.4.3 SRPM here

RTMix is a Real-time performance application whose sole purpose is to
function as an interface between a live performer and computer,
regardless whether computer is performing a simple playback function,
or doing a convoluted real-time processing of the performer. It is
also designed to leave the smallestcpu usage footprint possible, so
that the maximum amount of resources are left available for the audio
processes.

My rtmix-0.72a RPM here
My rtmix-0.72a SRPM here

ALSA Patch Bay is a graphical patch bay for the ALSA sequencer API.

My alsa-patch-bay-0.5.2 RPM here
My alsa-patch-bay-0.5.2 SRPM here
libgtkmm2.0_1-2.2.1 RPM here
libgtkmm2.0_1-devel-2.2.1 RPM here
gtkmm2.0-2.2.1 SRPM here
libsigc++1.2-1.2.4 RPM here
libsigc++1.2-devel-1.2.4 RPM here
libsigc++1.2-examples-1.2.4 RPM here
libsigc++1.2-1.2.4 SRPM here
My jackit-0.83.5 RPM here
My jackit-example-clients-0.83.5 RPM here
My libjack0-0.83.5 RPM here
My libjack0-devel-0.83.5 RPM here
My jackit-0.83.5 SRPM here
My jackit-realtime-0.83.5 RPM here
My jackit-realtime-0.83.5 SRPM here

jMax is a visual programming environment for building interactive musical and multimedia applications.

My jmax-4.0.2 RPM here
My jmax-client-4.0.2 RPM here
My jmax-common-4.0.2 RPM here
My jmax-devel-4.0.2 RPM here
My jmax-jackit-4.0.2 RPM here
My jmax-java-4.0.2 RPM here
My jmax-4.0.2 SRPM here
My jackit-example-clients-0.83.5 RPM here
My libjack0-0.83.5 RPM here
My libjack0-devel-0.83.5 RPM here
My jackit-0.83.5 SRPM here
My jackit-realtime-0.83.5 RPM here
My jackit-realtime-0.83.5 SRPM here
j2re-1.4.1_01 RPM here
j2sdk-1.4.1_01 RPM here

Soundtracker is a music tracking tool for Unix / X11 similar in design to the DOS program
FastTracker and the Amiga legend ProTracker.

My soundtracker-0.6.7pre6 RPM here
My soundtracker-0.6.7pre6 SRPM here
My jackit-0.83.5 RPM here
My jackit-example-clients-0.83.5 RPM here
My libjack0-0.83.5 RPM here
My libjack0-devel-0.83.5 RPM here
My jackit-0.83.5 SRPM here
My jackit-realtime-0.83.5 RPM here
My jackit-realtime-0.83.5 SRPM here

BEAST (the Bedevilled Audio System) is a GTK+/GNOME based front-end to BSE (the Bedevilled Sound Engine).
BSE is a shared library that comes with the necessary framework to simulate audio synthesis (modular synthesis) in realtime and allow for song composition.

beast-0.5.4 RPM here
libbeast1-0.5.4 RPM here
libbeast1-devel-0.5.4 RPM here
beast-0.5.4 SRPM here
guile-1.6.4 RPM here
libguile12-1.6.4 RPM here
libguile12-devel-1.6.4 RPM here

Cheesetracker is a portable Impulse Tracker clone.

cheesetracker-0.8.0 RPM here
cheesetracker-0.8.0 SRPM here
scons-0.91 RPM here
scons-0.91 SRPM here

My email